Search results

This paper aims to evaluate the sulfide stress cracking (SSC) resistance of L80 casing steels with different alloying chemistries (e.g. Ti-B and Mn-Cr-Mo) by correlating the reduction in area ratio with the mechanical property, inclusion and carbide.

SSC tests were conducted in 5.0 Wt.% sodium chloride and 0.5 Wt.% acetic acid solution saturated with H₂S using constant load tensile method. The microstructure and fracture morphology of the steel were observed using scanning electron microscope. The inclusion and carbide were identified by energy dispersive spectroscopy and auger electron microscope.

Among all the testing steels, electric resistance welding (ERW) L80-0.5Mo steel demonstrates the highest SSC resistance because of its appropriate mechanical properties, uniform microstructure and low inclusion content. The SSC resistance of L80 steels generally decreases with the rising yield strength. The fracture mode of steel with low SSC resistance is jointly dominated by transgranular and intergranular cracking, whereas that with high SSC resistance is mainly transgranular cracking. SSC is more sensitive to inclusions than carbides because the cracks are easier to be initiated from the elongated inclusions and oversized oxide inclusions, especially the inclusion clusters. Unlike the elongated carbide, globular carbide in the steel can reduce the negative effect on the SSC resistance. Especially, a uniform microstructure with fine globular carbides favors a significant improvement in SSC resistance through precluding the cracking propagation.

The paper provides the new insights into the improvement in SSC resistance of L80 casing steel for its application in H₂S environment through optimizing its alloying compositions and microstructure.

Six-axis force sensors play an important role in civilian and military fields because of their multifunctionality. In the context of sensor structure design, sensitivity and sensitivity isotropy are often considered. This paper aims to study the possible relationship between the sensitivity/sensitivity isotropy and structural parameters of an 8/4–4 parallel six-axis force sensor. A comprehensive evaluation index and structural optimization design scheme are suggested in the end.

Based on the conditional number of the Jacobian matrix spectral norm, the sensitivity and sensitivity isotropy of the sensor are derived. Orthogonal experiments are used to determine the degree of primary and secondary factors that have a substantial effect on the sensor characteristics. The relationship between the performance indices and the structural parameters is analyzed by the performance atlas method. The comprehensive evaluation index lays the foundation for the structural optimization design of an 8/4–4 parallel six-axis force sensor.

The variation in each performance index of the sensor for each of the structural parameters is analyzed, and the structural parameters of the sensor with the desired performance indices can be easily selected from the performance atlases. A comprehensive performance evaluation index with a target value of 1 is proposed, and the overall influence of the structural parameters on the sensor performance index is investigated. A simulation example shows the feasibility of the proposed evaluation index.

The importance of each structural parameter of the 8/4–4 parallel six-axis force sensor is determined through orthogonal experiments in this paper. Relations among the structural parameters meeting the performance indices are derived and shown in the performance atlases. A comprehensive evaluation index is proposed to analyze the overall sensor performance.

The purpose of this paper is to explore how far plans to “modernize” hospital management in China are converging toward a global model of new public management (NPM) or represent a distinctive pathway.

This paper draws on a systematic review of available secondary sources published in English and Chinese to describe both the nature and trajectory of hospital management reforms in China.

In China, while public hospital reforms bear many of the hallmarks of the NPM, they are distinctive in two key respects. First, the thrust of current reforms is to partially reverse, not extend, the trend toward marketization in order to strengthen the public orientation of public hospitals. Second is a marked gap between the rhetoric and reality of empowering managers and freeing them from political control.

This paper develops a framework for understanding the drivers and obstacles to hospital management reforms in China that is useful for managers, clinicians and policy makers.

In China, few authors have considered NPM reform in relation to healthcare. This paper contributes in better understanding current reforms taking place in China’s expanding healthcare sector and locates these within broader theoretical and policy debates.

In recent years, a great deal of work has emerged on eco-cities in China. Specifically, writers have discussed the role of the entrepreneurial state in the construction of eco-cities and have noted the role of these cities in the production of high-end real estate and new forms of capital accumulation and land acquisition. Whilst this chapter supports these arguments, we argue that the emergence of eco-cities in China is tied up with broader socioeconomic and cultural discourses and discourses of governance. We explore these ideas through a qualitative investigation of an eco-city known as the North Lake (Beihu) Ecological New Town (NLENT) located in the city of Jining, Shandong province. Specifically, this project, which involved the collection of documents, photographs and 20 semi-structured interviews, aims to understand the role that discourses of class, taste and consumption play in the fashioning of Chinese eco-cities. In exploring discourses of ‘green conduct’, this chapter also seeks to understand the role of eco-cities in the governmental fashioning of Chinese subjects and bodies. In this regard, this chapter suggests that whilst new forms of green development have played a part in urban expansion, new green real estate zones such as the NLENT have a powerful role to play in the construction and shaping of Chinese identity and behaviour.

This paper aims to investigate the dyeability of tussah silk fabric with lotus seedpod extract as the source of nontoxic and eco-friendly dyestuffs and functional agent.

Mordant free dyeing method was carried out using citric acid (CA) as the cross-linking agent to link the fibre and dye molecules. First, the natural pigment of oligomeric procyanidins was extracted from the lotus seedpod and then used to dye the tussah silk fabric. After the dyeing process, the dyed samples were treated with CA solution under different concentrations to improve the colour fastness.

The tussah silk fabric was successfully coloured in reddish brown through the dyeing process and charactered by using Fourier-transform infrared spectroscopy spectrometer. Moreover, lotus seedpod extract could impart excellent UV protection ability to the dyed samples, and UPF values reached up to 2000. CA dosage influenced the colour characteristics, UV protection and anti-wrinkling performance. The optimum dosage of CA was 7% (Wt.%). In addition, dyed silk fabric showed good antibacterial activity and the calculated bacteriostatic rate against Escherichia coli and Staphylococcus aureus were 83.27 and 60.2%, respectively.

This bio-dyeing strategy provided a simple and effective method for sustainable tussah silk fabric dyeing process.

This paper provides a novel dyeing strategy for mordant free dyeing and functionalization of tussah silk fabric, with lotus seedpod extract as natural pigment and CA as cross-linking agent to link the fibre and dye molecules.

The purpose of this paper is to solve the problem that the relationship between loading forces, which were applied at different positions on a plane, and output values of load-sharing dynamometer is non-linear.

First, the analytical model of ISPM (isodynamic surface proportional mapping method) method, which is used to calibrate dynamometer, was established. Then, a series of axial force calibration tests were performed on a load-sharing dynamometer at different loading positions. Finally, according to output values, calibration forces at different loading positions were calculated by ISPM method, and corresponding distribution histogram of calibration force error was generated.

The largest error between calculated force and standard force is 2.92 per cent, and the probability of calculated force error within 1 per cent is 91.03 per cent, which verify that the ISPM method is reliable for non-linear calibration of dynamometers.

The proposed ISPM method can achieve non-linear calibration between measured force and output signal of load-sharing dynamometer at different positions. In addition, ISPM method can also solve some complex non-linear problems, such as prediction of plane cutting force under the influence of multiple parameters, the force measurement of multi-degree-of-freedom platform and so on.

The purpose of this study is to put forward a high-strength bolt end-plate connection of prefabricated concrete beam-column joint and carry out the pseudo-static test.

ABAQUS finite element software is used to study the fire resistance performance of high-strength bolt end-plate prefabricated joint. This mainly considers the influence of axial compression ratio, screw preload, end-plate thickness and steel hoop thickness.

The results show that the thickness of end-plate and steel hoop has a certain effect on the fire resistance. The change of screw preload has little effect on the fire resistance limit. Compared with the cast-in-place concrete beam-column joint, the deformation trend of column-beam end of the fabricated joint is basically the same as that of cast-in-place joint.

To study the mechanical performance of this kind of joint more comprehensively, the finite element software is used to study the prefabricated concrete beam-column joint with end-plates, and the effects of axial compression ratio, screw preload, end-plate thickness and steel hoop thickness on the fire resistance of joints are mainly considered.

This paper traces the incorporation of western educational histories in the development of normal-school curricula during the late Qing Dynasty and the Republic of China (1901–1944). It uses publication networks to show how the study of comparative educational history facilitated the international circulation of knowledge in the teaching profession, and how the “uses” of educational history were shaped by larger geopolitical forces.

This paper analyzes the international exchange of texts between normal schools in China and Japan and, subsequently, between normal schools in China and the United States. A database of 107 publications in the field of western educational history that were adopted in China reveals specific patterns of textual citation, cross-reference, and canon-formation in the field of educational historiography.

With conclusions derived from a combination of social network analysis and clustering analysis, this paper identifies three broad stages in China's development of normal-school curricula in comparative educational history: “Japan as Teacher,” “transitional period” and “America as Teacher.”

Statistical analysis can reveal citation and reference patterns but not readers' understanding of the deeper meaning of texts – in this case, textbooks on the subject of western educational history. In addition, the types of publications analyzed in this study are relatively limited, the articles on the history of education in journals have not become the main objects of this study.

This paper uses both quantitative and qualitative methods to uncover the transnational circulation of knowledge in the field of comparative educational history during its formative period in China.